Cat.5E UCat.5E UTP CCA 24AWG 15M Patch Cord cat5e patch cord
▌ Product introduction
In order to reduce signal interference, each pair of twisted pair cables is twisted by two insulated copper conductors, and different pairs in the same cable have different degrees of twist.
In addition to the two insulated copper conductors constituting the twisted pair shall be twisted as required, the wire pairs in the standard twisted pair cable shall also be twisted counterclockwise. Otherwise, it will cause a mismatch of cable resistance and limit the transmission distance. This is rarely noticed by ordinary users. Interested readers can refer to TIA / eia568a (TIA / EIA 568 is a cabling standard formulated by ANSI in 1996, which gives relevant infrastructure during network cabling, including cables, connecting equipment, etc. the letter "a" refers to IBM's cabling standard, while at & T uses the letter "B") Specific provisions in
* Structured cabling for data transmission, transmission of digital, voice and video signals;
* Multi user telecommunication socket;
* Centralized joint point;
* Support all applications designed for category 5 or lower cabling systems.
|Type||CAT5E UTP patch Ethernet LAN Cable|
|Data transfer rate||100Mbps|
|Conductor material||oxygen-free copper|
|Overall Outside Diameter||6.0mm|
|AWG||24/26AWG strand wire|
|Bending radius||4 times cable diameter|
|Cable type||UTP CAT5E||FTP CAT5E|
|Material||Bare Copper/CCA||Bare copper /CCA|
|Pair 1 : Blue,White / Blue|
|Pair 2 : Orange,White / Orange|
|Pair 3 : Green,White / Green|
|Pair 4 : Brown,White / Brown|
|Shielding||Material||-||Aluminium+ foil +Tinned copper drain wire|
|Material||Flame retardant PVC/PE||PE/PVC|
|Number of Pairs||4pairs||4pairs|
|package||305M/Roll in Box||305M/Roll in Box|
|Net Weight (kgs/box)||9||12|
|Gross Weight (kgs/box)||10||13|
|Impedance (ohms )||100±15||100±15|
|Operating Temperature Range(℃)||-20 to 75||-20 to 70|
CAT5e network jumper is mainly used for data transmission at 1000Mbps rate. It has the characteristics of small attenuation, less crosstalk and smaller delay error. The fast (FS) CAT5e network jumper can support the transmission rate of up to 10Gbps Ethernet when the external crosstalk is very small. It can be used for network connection, cabling engineering, termination between equipment or horizontal subsystems, and connection between equipment port and modular jumper system. Such as LAN interface between telecom broadband ADSL modem and wireless router, router, switch, hub, firewall and other equipment, network card interface of computer, etc.
Cat 5 network cable is composed of multiple pairs of twisted pairs and a plastic sheath. With small attenuation and less crosstalk,It has higher anti attenuation ability and greatly improves the performance. Many performance parameters. Near end crosstalk, attenuation crosstalk ratio and return loss are improved.It can be used for network connection, cabling engineering, termination between equipment or horizontal subsystems, and connection between equipment ports and modular jumper system. Such as LAN interface between telecom broadband ADSL modem and wireless router, router, switch, hub, firewall and other equipment, computer network card interface, etc.
|office||Family||Internet Bar||The server|
Q: Are you a cable and wire manufacturer?
— Yes, we are a professional wire and cable manufacturer.
Q: Can you offer a discount on cables?
— The price is negotiable according to the specification and quantity.
Q: Can you offer FREE samples?
— Yes,FREE samples are available, you just take care of the freight fee.
Q: What about your MOQ?
— Usually, our MOQ is 5000 Meters, but we’ d love to talk about your MOQ.
Q: Do you accept customize cables?
— Yes, we are more than happy to make OEM and ODM for you.
Q: How long is the lead time?
— Usually it’s about 10-14 days.