GYXTC8S Self Support Armored Fiber Optic Cable 12 Core Figure 8 For Duct / Aerial
GYXTC8S ダクト/空中用自己サポート装甲光ファイバ ケーブル (2 ～ 24 コア)。スチール製の装甲、防水技術、PE シース、メッセンジャー ワイヤーを備えており、取り付けが簡単です。優れた耐潰れ性とUVカット。
Self Support Armored Fiber Optic Cable
,Armored Fiber Optic Cable 12 Core
,GYXTC8S Armoured Fibre Optic Cable
GYTC8S is an outdoor use optical fiber cable suitable for duct and aerial applications. We supply GYXTC8S fiber optic cable from 2 fiber cores to 24 fiber cores. Both single mode type and multimode types are available.
The fibers, 260μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of corrugated steel tape longitudinally. Between the corrugated steel tape and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with PE sheath.
- Good mechanical and temperature performance
- High strength loose tube that is hydrolysis resistant
- Special tube filling compound ensure a critical protection of fiber
- Crush resistance and flexibility
- PE/LSZH sheath protects cable from ultraviolet radiation
- 100% cable core filling
| Items | Specifications |
|---|---|
| Fiber Count | 2~24 |
| Colored Coating Fiber | Dimension: 260µm±15µm Color: Blue, Orange, Green, Brown, Gray, White |
| Loose Tube Dimension | Dimension: 2.10mm±0.05mm Material: PBT Color: Natural |
| Strength Member | Diameter: 1.0mm Material: Steel |
| Outer Jacket | Dimension: 8.0mm±0.1mm Material: PE Color: Black |
| Fiber Count | Cable Diameter (mm) | Cable Weight (kg/km) | Tensile Strength Long/Short Term (N) | Crush Resistance Long/Short Term (N/100mm) | Bending Radius Static/Dynamic (mm) |
|---|---|---|---|---|---|
| 2~12 | 10.6 | 124 | 1000/3000 | 1000/3000 | 10D/20D |
| 14~24 | 12.0 | 147 | 1000/3000 | 1000/3000 | 10D/20D |
Cable is supplied in lengths as specified in PI or as requirement. Each length will be shipped on a separate iron-wooden drum. The minimum barrel diameter of the drum will not be less than 30 times the cable diameter.
The cable ends will be sealed with plastic protection caps to prevent water penetration. The ends will be easily accessible for testing. A final inspection test report with attenuation performance data for each fiber is attached inside the drum.
