Water Blocking Double Armoured Fiber Optical Cable Anti Ant Outdoor Optical Cable
O cabo de fibra óptica com blindagem dupla GYTS53 oferece 2 a 144 núcleos, instalação direta no enterramento e blindagem robusta de fita de aço para resistência a esmagamentos/roedores. Com padrões IEC, faixa operacional de -40°C a +70°C e opções LSZH, garante redes de comunicação externas confiáveis.
Water Blocking armored fiber optic cable
,double armored communication cable
,Anti Ant Outdoor Optical Cable
GYTS53 Outdoor Communication Large-Core Structure Directly Buried Anti-Ant Double Armoured Fiber Optical Cable
The structure of GYTS53 optical cable features 250μm optical fiber sheathed in a loose tube made of high modulus material, with the loose tube filled with waterproof compound. The cable core center contains a metal reinforced core. For certain optical fiber cables, a layer of polyethylene (PE) is extruded outside the metal reinforced core. The loose tube (and filler rope) is twisted around the central reinforcing core to form a compact, round cable core, with gaps filled with water blocking fillers. Plastic coated steel tape is longitudinally wrapped and then extruded with a polyethylene inner sheath. Double-sided plastic coated steel tape (PSP) is longitudinally wrapped and then extruded with polyethylene sheath to complete the cable assembly.
- Adopting "SZ" bidirectional layer twisting technology
- Filling water-blocking ointment step by step, water-blocking in full section
- The steel (aluminum) belt has reliable bonding with the edge, high strength, and no cracking when twisted
- Stable fiber excess length control
- After the cable is formed, the additional attenuation of the fiber is almost zero, and the dispersion value does not change
- Excellent environmental performance, applicable temperature range is -10℃ to +70℃
| Fiber Count | Nominal Diameter (mm) | Nominal Weight (kg/km) | Max Fibers per Tube | Max No. of (Tubes+fillers) | Allowable Tensile Load (N) | Allowable Crush Resistance (N/100mm) | ||
|---|---|---|---|---|---|---|---|---|
| Short Term | Long Term | Short Term | Long Term | |||||
| 2~30 | 13.2 | 162 | 6 | 5 | 3000 | 1000 | 3000 | 1000 |
| 32~48 | 13.8 | 175 | 8 | 6 | 3000 | 1000 | 3000 | 1000 |
| 50~72 | 14.6 | 205 | 12 | 6 | 3000 | 1000 | 3000 | 1000 |
| 74~96 | 16.0 | 230 | 12 | 8 | 3000 | 1000 | 3000 | 1000 |
| 98~144 | 17.6 | 285 | 12 | 12 | 3000 | 1000 | 3000 | 1000 |
| >144 | Available upon customer's request | |||||||
Notes:
1. For flame retardant cable, outer sheath can be made of low-smoke halogen-free (LSZH) material, and the type is GYTZS.
2. Upon customer's request, cables with longitudinal color strip on outer sheath can be offered. More details, please refer to GYTA series.
3. Special cable structure can be designed and manufactured on customer's request.
| Characteristics | Conditions | Specified Values | Units |
|---|---|---|---|
| Mode field diameter (MFD) | 1310nm | 9.2±0.4 | µm |
| 1550nm | 10.4±0.8 | µm | |
| Cut-off wavelength (λcc) | ≤1260 | nm | |
| Attenuation coefficient | 1310nm | ＜0.35 | dB/km |
| 1383nm | ＜0.35 | dB/km | |
| 1550nm | ＜0.22 | dB/km | |
| Macro bending loss | φ75mm, 100circles, at 1550nm | ≤0.1 | dB |
| Attenuation non-uniformity | ≤0.05 | dB | |
| Dispersion coefficient | 1288~1339nm | ≤3.5 | Ps/(nm.km) |
| 1271~1360nm | ≤5.3 | Ps/(nm.km) | |
| 1550nm | ≤18 | Ps/(nm.km) | |
| Zero dispersion wavelength | 1300~1324 | nm | |
| Max zero dispersion slope | ≤0.093 | Ps/(nm2.km) | |
| Group index of refraction (typical value) | 1310nm | 1.466 | |
| 1550nm | 1.467 | ||
| Cladding diameter | 125.0±1.0 | µm | |
| Core/cladding concentricity error | ≤0.8 | µm | |
| Cladding non-circularity | ≤1.0 | % | |
| Coating diameter | 245.0±10 | µm | |
| Cladding/coating concentricity error | ≤12.0 | ||
| Coating non-circularity | ≤8 | % | |
| Diameter of colored coating | 250.0±15 | µm | |
| Curling (radius) | ≥4 | m | |
| Proof stress | ＞0.69 | Gpa | |
| Coating strip force | Average value | 1.0-5.0 | N |
| Peak value | 1.3-8.9 | N | |
| Dynamic stress corrosion susceptibility parameter (nd value) | ≥20 |
| Performance Category | Test | Standard |
|---|---|---|
| Mechanical Performance | Max Tension Performance | IEC 60794-1-2-E |
| Max. Operation Tension | IEC 60794-1-2-E1 | |
| Crush Test | IEC 6079 -1-2-E3 | |
| Impact Test | IEC 60794-1-2-E4 | |
| Repeated Bending | IEC 60794-1-2-E6 | |
| Torsion Test | IEC 60794-1-2-E7 | |
| Cable bend | IEC 60794-1-2-E11A | |
| Environmental Performance | Attenuation Coefficient | ITU-T G.652 |
| Structural Test | IEC-60793-1-20 | |
| Temperature Cycling | IEC 60794-1-2-F1 | |
| Water Penetration | IEC 60794-1-2-F5B | |
| Filing Compound Flow | IEC 60794-1-E14 |
- Cable Core: The loose tubes are stranded around the central strength member utilizing SZ. SZ stranding wraps the tubes in one direction for several turns, then in the other direction.
- Central Strength Member: The central strength member is made of steel. It provides both tensile and anti-buckling strength to the cable.
- Loose Tube: Optical fibers are housed in jelly filled tube. The tube is manufactured with industry standard PBT. It is colored for easy identification according to the scheme shown above.
- Water Blocking Material: Filling compound, the water blocking material between the loose tube and the inner sheath protect cable from water intrusion.
- Armour: Two layer of corrugated steel tape provide additional cable compression strength, maximum anti-crush property, rodent protection and bullet resistant performance.
- Outer Jacket: A black high density polyethylene jacket is extruded over the cable core and corrugated steel tape armor as the sheath.
- Cable Sheath Marking: Each cable have the following information clearly marked on the outer jacket of cables: manufacturer name, year of manufacture, cable and fiber type, length mark, or as customer's requirements.
