Loose Tube GYFTY Fiber Optic Outdoor Cable Non Armored 2 Core Waterproof Design
Cavo in fibra ottica per esterni GYFTY non metallico e non armato. Guaina in PE a 2 conduttori, resistente ai raggi UV/umidità, elemento di rinforzo in FRP. Ideale per applicazioni di telecomunicazioni, antenne e condotte. La struttura a tubo sciolto riempito di gel garantisce una protezione superiore delle fibre.
Loose Tube Fiber Optic Outdoor Cable
,Non Armored fiber optic cable
,Waterproof Design fiber optic cable
Loose Tube Non-Metallic & Non-Armored 2 Core GYFTY Outdoor Fiber Optic Cable
- Fiber: 2 fiber multi-loose tube gel-filled
- Central Strength Member: Fiberglass reinforced plastic (FRP)
- Outer Jacket: Black UV Polyethylene (PE)
- Loose tube gel-filled construction for superior fiber protection
- Corrugated steel tape armor to protect cable from mechanical damage
- UV and waterproof design
| Fiber Type | G.652 | G.655 | 50/125 µm | 62.5/125 µm |
|---|---|---|---|---|
| Attenuation | 850 nm | <3.0 dB/km | <3.3 dB/km | |
| 1300 nm | <1.0 dB/km | <1.0 dB/km | ||
| 1310 nm | <0.36 dB/km | <0.40 dB/km | ||
| 1550 nm | <0.22 dB/km | <0.23 dB/km | ||
| Bandwidth | 850 nm | >500 MHz·km | >200 MHz·km | |
| 1300 nm | >500 MHz·km | >500 MHz·km | ||
| Numerical Aperture | 0.200±0.015 NA | 0.275±0.015 NA | ||
| Cable Cut-off Wavelength λcc | <1260 nm | <1450 nm |
| Fiber Count | Nominal Diameter (mm) | Nominal Weight (kg/km) | Max Fiber Per Tube | Max No. of (Tubes+fillers) | Allowable Tensile Load (N) | Allowable Crush Resistance (N/100mm) | ||
|---|---|---|---|---|---|---|---|---|
| Short Term | Long Term | Short Term | Long Term | |||||
| 2~36 | 10.2 | 85 | 6 | 6 | 1500 | 600 | 1000 | 300 |
| 38~72 | 11.1 | 100 | 12 | 6 | 1500 | 600 | 1000 | 300 |
| 74~96 | 12.6 | 130 | 12 | 8 | 1500 | 600 | 1000 | 300 |
| 98~120 | 14.1 | 162 | 12 | 10 | 1500 | 600 | 1000 | 300 |
| 122~144 | 15.9 | 204 | 12 | 12 | 1800 | 600 | 1000 | 300 |
This datasheet can only be a reference, but not a supplement to the contract. Please contact sales for details.
Cable is supplied in length as specified in PI or as requirement. Each length will be shipped on a separate iron-wooden drum. The minimum barrel diameter of the drum will not be less than 30 times the cable diameter.
The cable ends will be sealed with plastic protection caps to prevent water penetration. The ends will be easily accessible for testing. A final inspection test report with attenuation performance data for each fiber is attached inside the drum.
