FTP Indoor 4pair 23awg 99.9%Oxygeen-free Copper 1000ft Pull Box Cat6 Lan Cable
Not all Ethernet cable is created equally. What's the difference, and how do you know which you should use? Let's look at the technical and physical differences in Ethernet cable categories to help us decide.
Ethernet cables are grouped into sequentially numbered categories (“ cat ”) based on different specifications; sometimes the category is updated with further clarification or testing standards (eg 5e, 6a). These categories are how we can easily know what type of cable we need for a specific application. Manufacturers are required to adhere to the standards, which makes our lives easier.
Cable Specification
|
Conductor
|
Material
|
Solid Bare Copper
|
|
Size
|
23AWG X 4P
|
|
|
Construction
|
1/0.585±0.005mm
|
|
|
Insulation
|
Material
|
HDPE
|
|
Diameter
|
1.02mm±0.01mm
|
|
|
Colors
|
Blue-White/Blue
|
|
|
Orange-White/Orange
|
||
|
Green-White/Green
|
||
|
Brown-White/Brown
|
||
|
Shield
|
Filler
|
LDPE
|
|
Core wrap
|
PE Tape
|
|
|
Drain wire
|
1/0.40±0.004mm
|
|
|
Shield
|
AL Foil
|
|
|
Core wrap
|
PE Tape
|
|
|
Jacket
|
Material
|
PVC
|
|
Diameter
|
7.60±0.20mm
|
|
Electrical & Physical Characters
|
|||
|
Rating
|
75℃ 30V
|
||
|
Conductor Resistance
|
Max 78.8ohm/km at 20℃
|
||
|
Dielectric Strength
|
Min AC1.5KV
|
||
|
Spark Test
|
5.0KV
|
||
|
AC Leakage Current Through overall Jacket
|
AC 1500V <=10mA
|
||
|
Insulation
|
Unaged
|
Tensile Strength
|
16.5 Mpa
|
|
Elongation
|
500%
|
||
|
Aged
|
Tensile Strength
|
14.2 Mpa(100℃ 168h)
|
|
|
Elongation
|
250%(100℃ 168h)
|
||
|
Jacket
|
Unaged
|
Tensile Strength
|
13.8 Mpa
|
|
Elongation
|
150%
|
||
|
Aged
|
Tensile Strength
|
11.7 Mpa(100℃ 168h)
|
|
|
Elongation
|
80%(100℃ 168h)
|
||
|
Cold Bend Test
|
-20℃ 4hours No Cracking
|
||
|
DC Resistance Unbalance
|
Max 5%
|
||
|
Pair-to-Ground Capacitance Unbalance
|
Max 3300pF/km
|
||
|
Characteristic Impedance
|
1~500MHZ 100±15OHM
|
||
|
Propagation Delay
|
500MHZ Max 536ns/100m
|
||
|
Delay Skew
|
1~500MHZ Max 40ns/100m
|
||
Cable Overview
Material Instruction
1. 99.9%Oxygeen-free Copper.
2. Eco-friendly,pollution-free and new materials selected.Promise new material only.
3. Insulation: Solid HDPE.
4. Eco-friendly PVC Jacket , high-temperature resistance,long working life.
Physical Electrical Characteristics
1. Using standard twisted construction design, small crosstalk of signal transmission Upload and download in high speed transfer.
2. Bandwidth is standard 250 MHz.
3. Support 10-Gigabit Ethernet netword transmission requirements.
4. DC resistance (max): 4.8Ω/100m at 20°C;
5. Mutual capactitance (max): 5.6nF/100m;
6. Unbalanced capacitance (max): 330pF/100m;
7. Dielectric strength between conductors (min): 2.5kV/2s;
8. Impedance: 1-250MHz 100±15Ω;
9. Differential phase delay (max): 45ns/100m;
10. Operating temperature: -20~+60°C;
11. Permitted bend radius: 10 times diameter of the cable.
Technical differences
As the category number gets higher, so does the speed and Mhz of the wire. This is not a coincidence, because each category brings more stringent testing for eliminating crosstalk (XT) and adding isolation between the wires.
This does not mean your experiences have been the same. Physically you can use Cat-5 cable for 1 Gb speeds, and I have personally used cable longer than 100 meters, but because the standard has not been tested for it, you'll probably have mixed results. Just because you have Cat-6 cable, doesn't mean you have 1 Gb network speeds either. Every connection in your network needs to support the 1 Gb speed and in some cases, the connection will need to be told in software to use the available speed.
Category 5 cable was revised, and mostly replaced with, Category 5 Enhanced (Cat-5e) cable which did not change anything physically in the cable, but instead applied more stringent testing standards for crosstalk.
Category 6 was revised with Augmented Category 6 (Cat-6a) which provided testing for 500 Mhz communication (compared to Cat-6's 250 Mhz). The higher communication frequency eliminated alien crosstalk (AXT) which allows for longer range at 10 Gb/s .
Standard / Certificate
1. Reference Standard:YD/T1019-2001,ISO/IEC11801,ANSI/TIA/EIA - 568B
2. Certificates ISO9001,14000.
OEM / Related Production For Lan Cable
OEM custom-made production according to different customer's request. Shape, PVC ,color, Conductor diameter, degree of tightness, logo design, Inner and Outer package design, all of below request are available.
Production Line and Quality Test
Packing
Payment and Shipping
Payment
1. We usually use T/T
T/T deposit before production and balance when shipment.
2. Payment terms: Western Union, Escrow, Paypal, T/T ,L/C
Shipping
If the quantity of the order is not very big, we usually send by express delivery,such as TNT,DHL,UPS,FEDEX or EMS.
For big order,we will ship the goods by air or by sea.
