SC UPC Fiber Optic Patch Cord 3.0mm 2.0mm 0.9mm Pigtail Fiber Optic Cable
SC UPC 광섬유 패치 코드는 낮은 삽입 손실(≤0.2dB), 높은 반사 손실(≥55dB) 및 내구성이 뛰어난 지르코니아 세라믹 페룰을 제공합니다. SM/MM 섬유, 다양한 직경, 맞춤형 길이/재킷으로 제공됩니다. CATV, 통신 및 데이터 네트워크에 이상적입니다.
SC UPC fiber optic patch cord
,3.0mm fiber optic cable
,fiber optic pigtail cable
Fiber Optic Pigtail For Optical Cable Connector SC / UPC
Fiber optic Pigtail is a fiber optic cable capped at one end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment.
Fiber optic cable is available in both single mode and multimode versions. The SC connector has a zirconia ceramic ferrule with pre-polished UPC profile and convex spherical end. These end-face types allow for faster polishing, low back reflection and optical loss, while ensuring maximum repeatability.
- 100% optic test: Insertion Loss: ≤0.3 (PC); ≤0.2 (APC); ≤0.2 (UPC); ≤0.3 (SPC)
- 100% optic test: Return Loss: ≥45 (PC); ≥60 (APC); ≥55 (UPC); ≥50 (SPC)
- Excellent qualified standard PC, APC, UPC polishing
- Simplex and duplex connector available
- High precision of mechanical dimensions
- Good exchange ability and good durability
- Optical System Access Network
- Telecommunications networks
- Broadband/CATV networks
- Data communications networks, including high-bandwidth equipment
- Improves and simplifies fiber routing
- Decreases fiber management space
- OEM or customized for special applications
- Low insertion loss and reflectance
- High Density
- Snap-In cassette panel for easy installation, removal and expansion
| Parameter | Single-mode | Multimode |
|---|---|---|
| PC | UPC | APC | PC | |
| Insertion Loss | ≤0.3dB | ≤0.3dB | ≤0.2dB | ≤0.2dB |
| Return Loss | ≥45dB | ≥50dB | ≥60dB | ≥35dB |
| Operating Wavelength | 1310nm, 1550nm | 850nm, 1300nm |
| Repeatability | ≤0.1dB | |
| Working Temperature | -40℃ to +75℃ | |
| Service Life | >1000 mating cycles | |
Cable is supplied in lengths as specified in PI or as requirement. Each length will be shipped on a separate iron-wooden drum. The minimum barrel diameter of the drum will not be less than 30 times the cable diameter.
The cable ends will be sealed with plastic protection caps to prevent water penetration. The ends will be easily accessible for testing. A final inspection test report with attenuation performance data for each fiber is attached inside the drum.
