Opgw Aeirlal Wire 12 Core Single Mode G652d OPGW Fiber Optic Cable
▌Product overview
OPGW adds optical fiber on the premise of maintaining all the performance and functions of the original overhead ground wire, opens up a high-performance optical transmission channel, and makes it have both lightning protection and communication functions. It is a power cable with dual functions of traditional overhead ground wire and communication capability.
▌Application
OPGW optical cable is mainly used on 500kV, 220kV and 110kV voltage grade lines. Affected by line power failure, safety and other factors, it is mostly used on new lines.
The applicable characteristics of OPGW are:
(1) For lines with high voltage exceeding 110KV, the span is large (generally above 250m);
(2) It is easy to maintain and solve the problem of line crossing, and its mechanical characteristics can meet the requirements of line crossing;
(3) The outer layer of OPGW is metal armor, which has no effect on high voltage corrosion and degradation;
(4) OPGW must be powered off during construction, and the power failure loss is large, so OPGW should be used in new high-voltage lines above 110kV;
(5) In the performance indexes of OPGW, the greater the short-circuit current, the more it needs to be armored with good conductors, which correspondingly reduces the tensile strength. When the tensile strength is certain, to improve the short-circuit current capacity, only increase the metal cross-sectional area, resulting in the increase of cable diameter and cable weight, which puts forward safety problems for the strength of line poles and towers.
▌Features
It is applicable to 110kV and above high-voltage transmission lines. It is used to build new lines or replace the original traditional ground wires
The mechanical and electrical characteristics of the optical cable and the conventional overhead ground wire match well, which is convenient for the replacement of the original old ground wire and the design and installation of the new ground wire
| Items |
Opgw Aeirlal Wire 18 Core Single Mode G652d OPGW Fiber Optic Cable |
| Structure | Stainless steel loose tube |
| Feature | The OPGW uses stainless steel loose tube structure, increasing its reliability and |
| the performance of temperature-resistant. | |
| The OPGW meets the requirement of large fiber line application. | |
| The OPGW are specially applied for the optical communication system | |
| while installing the electric transmission line. | |
| Project design (sag-tension calculation, short circuit current, ADSS hardware fittings calculation) | |
| Excellent stainless steel tube stranding technology make the fibers have | |
| good secondary excess length and allow the fibers free movement in the tube. | |
| Which keeps the fiber stress-free while the cable is subjected to longitudinal stress. | |
| Cable diameter and weight approximate with another ground wire. Less additional load to tower, | |
| high tensile strength. | |
| ACSW, AAW and SST stranded design provide wide range combination of electrical conductivity | |
| and mechanical tensile strength. |
▌Standards
| ITU-TG.652 | Characteristics of a single mode optical fiber |
| ITU-TG.655 | Characteristics of a non-zero dispersion -shifted single mode fibers optical |
| EIA/TIA598 B | Col code of fiber optic cables |
| IEC 60794-4-10 | Aerial optical cables along electrical power lines-family specification for OPGW |
| IEC 60794-1-2 | Optical fiber cables -part test procedures |
| IEEE1138-2009 | IEEE Standard for testing and performance for optical ground wire for use on electric utility power lines |
| IEC 61232 | Aluminum -Clad steel wire for electrical purposes |
| IEC60104 | Aluminum magnesium silicon alloy wire for overhead line conductors |
| IEC 61089 | Round wire concentric lay overhead electrical stranded conductors . |
▌Typical design for Double Layer
| Specification | Fiber Count | Diameter(mm) | Weight (kg/km) | RTS(KN) | Short Circuit (KA2s) |
| OPGW-96[121.7;42.2] | 12 | 13 | 671 | 121.7 | 42.2 |
| OPGW-127[141.0;87.9] | 24 | 15 | 825 | 141 | 87.9 |
| OPGW-127[77.8;128.0] | 24 | 15 | 547 | 77.8 | 128 |
| OPGW-145(121.0;132.2) | 28 | 16 | 857 | 121 | 132.2 |
| OPGW-163(138.2;183.6) | 36 | 17 | 910 | 138.2 | 186.3 |
| OPGW-163(99.9;213.7) | 36 | 17 | 694 | 99.9 | 213.7 |
| OPGW-183(109.7;268.7) | 48 | 18 | 775 | 109.7 | 268.7 |
| OPGW-183(118.4;261.6) | 48 | 18 | 895 | 118.4 | 261.6 |
▌Product diagram
 |
|
▌Packaging
|
|
1. Standard Packaging: b. Standard Code(Product Type, Fiber Type,Fiber Count) |
Our Service: 1. We are the one of biggest manufacture of fiber optic cable in China and has more than 10 years manufacturing and selling experience. 2. We accept OEM. The cable size and material are customized. Ur own logo and own design are welcome. We will produce according to your requirment and description; 3. Please send us inquiry for more products info and we will give you feedback in 12 hours. |
▌FAQ
1. Are you the real manufacturer?
Us. We are the real manufacturer with 23 year’s history.
2. What’s the MOQ?
Us. The MOQ of Fiber Optic cable is 10km.
3. What’s delivery time?
Us. The general delivery time is 5-7 days after order confirmed. It depends on the order quantity.
4. How to Store the Optical Fiber Cable Properly?
Us. Store the drum indoor before using, the drum should place sideways not on the end.
5. Can you supply customized products and logo?
Yes. We supply OEM service. You can send us your drawing.
6. What’s your payment terms?
Us. We accept T/T,L/C,Western Union,D/P etc. 10% in advance and 90% before shipment.
